Searching...
 
 
 
 
 
 
 

Refine By

Availability

Brands

+ more brands

Consumer Reviews

Size

+ more sizes
 

Tools

286 Results
Per Page 30 60
1 2 3 4 5 Next >>
Park Tool Professional Tool Kit
$814.95

An expanded and evolved set of our finest professional level shop tools that addresses the changing tool demands of modern bikes and their mechanics. The PK-2 includes over 65 of our best tools and was put together with versatility in mind. A great way to outfit a pro bench, or to set up a fabulous… [more]

Park Tool Professional Travel And Event Kit
$734.95

A carefully selected set of some of our finest tools, housed in the BX-2 Blue Box Tool Case. The EK-2 contains more than 45 shop-level tools that fit into BX-2 Blue Box Tool Case with extra room for more tools and parts. Perfect for professional shop and team mechanics, as well as the home mechanic… [more]

Park Tool Bottom Bracket Tapping & Facing Set
$659.95

Park Tool's Bottom Bracket Tapping & Facing Set is a precision tool system which provides a piloted means of tapping the threads in the bottom bracket shell of a frame. After tapping, the taps act as guides to keep the included facing cutter perfectly square with the axis of the bottom bracket for… [more]

Park Tool Head Tube Reaming and Facing Set
$549.95

Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. Includes: • 30.1 mm reamer (part #751.2) and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm) •… [more]

Park Tool Head Tube Reaming and Facing Set (33.8mm reamer)
$549.95

Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set (33.8mm reamer) combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR-1B comes with a reamer of 33.9mm for the 1-1/8 inch headset standard. Includes: • 33.9mm… [more]

Park Tool Crown Race Cutting Tool
$539.95

To ensure proper headset performance and longevity, special attention must be given to accurately machine the fork’s crown race seat. Park Tool's Crown Race Cutting Tool is a professional-quality machining tool for milling both the outer edge and lower surfaces of the crown race seat. • Includes… [more]

Park Tool Disc Brake Mount Facing Set
$439.95

The DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor. - Faces any IS Mount, Post Mount, or new Shimano Flat Mount, including low clearance, chainstay mounts - Telescoping axle adaptors allow use with any configuration of… [more]

Park Tool 42mm Head Tube Reamer & Facer Set For Hiddenset Headsets
$412.95

The 761s Reaming and Facing Cutters are used to machine head tubes using integrated headsets with a 42 mm bearing and 45 degree angular contact used by the Campagnolo® Hiddenset standard. FSA® and other manufacturers also make headsets in this standard. Includes upper and lower cutters. [more]

Park Tool Professional Wheel Truing Stand
$412.95

The next generation of wheel truing stands! The TS-4 is made to accurately gauge any size wheel, with or without the tire installed. The TS-4 has many of the same features as Park Tool's famous TS-2.2 with some additional attributes to accommodate today’s wide variety of hub, wheel and tire… [more]

Park Tool Bottom Bracket Facing Set
$399.95

Park Tool's Bottom Bracket Facing Set is designed to be a complete self-contained facing set, combining top-quality precision parts with ease of use. Simply install the threaded inserts using the facer handle, then insert the facing tool through the guides and install the tension spring and speed… [more]

Park Tool Thru Axle Tap Set
$359.95

Frame and Fork Taps will become a lifesaver at some time for virtually every mechanic. These taps are made of high-carbon steel and are precision ground. Park Tool's Frame and Fork Taps cut easily and fit conventional tap handles. - Tap-12.1: 12Mm X 1.0 - Tap-12.2: 12Mm X 1.5 - Tap-12.3: 12Mm X… [more]

Park Tool Advanced Mechanic Tool Kit
$338.95

Designed specifically for the home mechanic who wants the best, the AK-2 Advanced Mechanic Tool Kit is a special collection of our finest tools, all housed in a tough toolbox. The AK-2 includes over 40 tools to work on a wide variety of current model bikes. A great set of carefully chosen tools a… [more]

Park Tool 49.59mm Head Tube Reamer & Facer for 1.5-Inch Headset Standard
$329.95

The Park Tool 758.2 will ream and face the head tubes of bike using the 1.5" standard. The 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and Reamer. Must also be used with the 750.2 Centering Cone Adaptor. [more]

Park Tool Hub Bearing Press Set
$329.95

- The HBP-1 is designed to quickly and accurately press bearings into a wide variety of cartridge bearing-type bicycle hubs. - Quick release design for fast tool installation and removal - Includes two bearing presses and precision machined aluminum pilots, bushings, and spacers - Works with more… [more]

Park Tool Fork Threading Set
$284.95

Park Tool's Fork Threading Set is designed for cutting new threads and for chasing existing threads on fork columns that are not chromed. The FTS-1's expandable cutting dies are made from the highest quality high-speed steel for precision cutting and long life. The unique thread guide system used… [more]

Park Tool Pressfit 30 Shell Reamer And Pilot Set
$279.95

The 791 Reamer Set reamer is used on the PF30 frame shells. The reamer is sized at 45.94mm. The 791 Reamer Set must used with the HTR-1 Head Tube Reamer and Facer, a 750.2 Centering Cone and the 690-XL Facer. The 791 set also includes a pilot that allows a facing-only option of the PF30 frame shell. [more]

Park Tool Blue Box Tool Case
$275.95

Keep your precious bicycle tools safe and secure when traveling to cycling events with Park's Blue Box Tool Case. It boasts a dent-proof composite shell supported by a tough, light aluminum frame. Inside are removable tool boards made with durable 600D ballistic nylon sewn to an ABS inner panel.… [more]

Park Tool Right Hand Bottom Bracket Tap
$195.93 - $265.93

Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use. [more]

Park Tool Adjustable Crown Race Puller
$259.95

- Precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork - Fully adjustable, allowing precise, independent positioning of each blade around the crown race for flexibility in fitting around crown race interferences - Works with 1,1-1/8,1-1/4,1.5"… [more]

Park Tool Crown Race Cutter Adaptor
$259.95

Park Tool's Crown Race Cutter Adaptor is used in conjunction with the CRC-1 Crown Race Cutting Tool (sold separately) to machine 39.8mm crown race seats (1.5” standard) on tapered forks with 1-1/8” steerer tubes. It includes a precision-machined adaptor body and a 39.8mm high-speed steel crown race… [more]

Park Tool Reamer & Spacer Set for BB30 Bottom Bracket Shells
$237.93

Park Tool's 752 Reamer and Spacer Set allows reaming of bottom bracket frame shells in the BB30 standard. The reamer is sized at 41.94mm. It is used with the HTR-1 Head Tube Reamer and Facer and a 750.2 Centering Cone (each sold separately). The set includes a spacer to stop the reaming depth. [more]

Park Tool Left-Hand Bottom Bracket Tap
$235.95

Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread. Note: It is very important to have sharp… [more]

Park Tool Cutting Facer
$142.95 - $225.95

Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter: - 45mm (690): The 690… [more]

Park Tool Bottom Bracket Bearing Press Set
$210.95

The BBP-1 quickly and accurately installs bottom bracket bearings into press fit-type bottom bracket shells. - Quick release design for fast tool installation and removal - 12 precision-machined bushings (in 6 sizes) to fit these bottom bracket configurations: - 386EVO, BB30, BB86, BB90, BB92,… [more]

Park Tool Adjustable Axle Set - For DT-5
$175.95

Upgrades the DT-5 to the DT-5.2. - Four telescoping axle adaptors - Two stand off studs for Flat Mount alignment - 12mm front fork thru axle sleeve [more]

Park Tool Bearing Cup Press
$173.95

Park's HHP-2 accurately aligns and presses 1-, 1-1/8-, 1-1/4- and 1.5-inch headset cups into your frame's headtube. It features a quick-release design for fast tool installation and removal, extra-long handles for superior leverage and stepped bushings for precise cup alignment. This versatile tool… [more]

Park Tool Reamer
$116.95 - $173.95

Park Tool offers premium-quality reamers for nearly any bicycle standard. The reamers below are designed to quickly, accurately, and precisely ream headtubes when used with Park's Head Tube Reamer (HTR), ensuring a perfect headset fit and prfoessional-quality bicycle build. Choose the correct… [more]

Park Tool Dial Indicator Gauge Set
$149.95

Park's Dial Indicator Gauge Set mounts to their TS-2 or TS-2.2 Truing Stand (sold separately). The set makes it easy to view and correct a wheel's lateral and radial run-out within a tolerance of .01mm. Compared to going by the gap between the truing stand pointer and rim, having gauges that put a… [more]

Park Tool BB86/92 Shell Reamer
$134.95

- Used to ream and face BB86/92 bottom bracket shells to an ID of 40.98mm - Used in conjunction with HTR-1 head tube reaming and facing set (PK-6710), 750.2 centering cone adapter (PK-6735) and 690-XL facing cutter (PK-6730) [more]

Park Tool Ratcheting Click-Type Torque Wrench
$132.99

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The TW-6.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s).… [more]

286 Results
Per Page 30 60
1 2 3 4 5 Next >>
 
 
Westerville
5985 Maxtown Rd.
Westerville, OH 43082
614.901.TREK (8735)

E-mail this location

Map and directions
Dublin
2720 Sawmill Place Blvd
Columbus, OH 43235
614.791.TREK (8735)

E-mail this location

Map and directions
Events
Service
Bike Fitting
Shop Online
Email Signup
Financing
Sitemap
Like Us on Facebook
Follow Us on Instagram